رادیو کنترل futaba 10J
کمتر کسی است که در زمینه RC فعالیت داشته باشد و با رادیو کنترل های Futaba آشنایی نداشته باشد. رادیو کنترل futaba 10J یکی از بهترین محصولات این شرکت است که دارای ۱۰ کانال می باشد. رادیو کنترل futaba 10J دستگاهی بسیار مناسب برای آنان که به دنبال امکانات زیاد و حرفه ای می باشند . رادیو کنترل futaba 10J اصل را فقط از جهان آرسی بخواهید .
مشخصات رادیو کنترل :
- فرکانس کاری : ۲٫۴ گیگاهرتز
- محل نصب مموری : دارد (مموری SD)
- تعدادکانال : ۱۰ کانال
- نمایش گر روی رادیو کنترل : دارد
- تنظیمات فرمامین حرکتی : دیجیتالی
- تعداد حافظه : ۲۰ حافظه قابل برنامه ریزی
- سایز نمایشگر : ۱۲۸*۶۴
- قابل استفاده در : هواپیما ، هلیکوتر و مولتی روتور
: Transmission
۱۰ (۸+۲) channels
Can be switched from T-FHSS (ten channels) to S-FHSS (eight channels) – modulation.
T-FHSS® frequency-hopping technology with integral telemetry
Broad channel spread is responsible for good interference rejection and ultra-fast response, giving a sensation of direct, accurate control.
FEC technology, T-FHSS® receivers constantly scan the input signal, and apply an intelligent error correction process
۱۰۰mW transmitter power
No loss of response speed even when the frequency band is densely occupied
Real-Time Response
Outstanding range
Direct, ultra-fast, fully digital modulation for extremely fast response
Easy Link – fast, extremely simple binding process between transmitter and receiver
Fast, reliable automatic re-binding even under difficult conditions
Intelligent servo timing for simultaneous servo addressing and prevention of servo timing differences
Dual Aerial Diversity – lightning-fast switching between two receiver aerials for optimum reception signal quality (according to receiver)
Integral range-check function for checking effective range before flying
: Telemetry
Synchronised bi-directional communication between transmitter and receiver with high telemetry data rate (up to nine times per second)
۳۲ telemetry channels
Long telemetry range
Real-time display of telemetry data on integral screen
Speech output via optional earphone with 3.5 mm barrel connector
Melody and sound output (via optional internal beeper or earphone)
Vibration alarm
Receiver battery low voltage warning system for monitoring the receiver battery
Freely configurable output of telemetry data using screen, sound, speech and vibration
Compatible with all Futaba telemetry sensors Ergonomics
Precision stick units for fine, accurate control
The “Open-Stick” mechanism features special bearings, and is virtually devoid of lost motion
Large 65 x 34 mm backlit screen (128 x 64 dots) with high contrast for excellent legibility even in strong sunlight
Graphic user interface and intuitive 3-D hot-key for simple operation of all functions Seven languages available: German, English, French, Italian, Spanish, Japanese or Dutch
Consistent, intuitive Futaba operating system for simple change-over
Most transmitter controls freely assignable
Fully expanded, with nineteen transmitter controls
Switchable stick modes (1-4) Trainer function
using either optional cable or wirelessly using radio module or S.BUS receiver
with individual function transfer (Teacher can release individual functions to the Pupil) and mix-mode (Teacher can override all functions)
S.BUS technology
Digital BUS technology for modelling
Pioneering serial control bus
Fully digital inclusion of S-BUS components such as S.BUS servos, S.BUS speed controllers and S.BUS sensors
The eight-channel T-FHSS receiver features eight PWM outputs and one digital S.BUS socket for S.BUS servos, S.BUS speed controllers and telemetry sensors.
Compatible with S.BUS1 and S.BUS2 bi-directional
Permits the ideal positioning of all components, with efficient wiring
Future-proof digital technology for all future Futaba components
S.BUS components can be programmed and registered directly at the transmitter
Serial digital signal, ideal for flybarless systems, gyros and battery backers Functions – General
۳۰ internal model memories
Model memory transfer by radio between two T10J transmitters, or from T8J to T10J.
Graphic servo monitor provides a clear display of all servo travels, with servo test function
Wide receiver voltage range of 3.6 V to 8.4 V allows broad choice of receiver battery types Future-proof: software update facility using optional CIU-2 adapter.
Mixer menus for programming all servos and mixer functions according to model type
: Special model type specific mixer programs for
Power models 2…۴ wing flaps
Model gliders 2…۶ wing flaps
Helicopters 8 swashplate types
More information: see Functions in detail
Five flight modes Helicopter menu; three flight modes in the Glider menu for each model memory, freely programmable to provide optimum settings for each flight mode
Programs for all tail types: normal, V-tail, delta, flying wing, separate elevators Ailvator
Servo travel adjustment for all proportional channels
Servo reverse and centre offset for channels 1…۸
Digital trim buttons – trim value memory when model memory is changed.
Trim value display in Home menu • Fail-safe and Battery fail-safe setting
Two operating hours timers, one of them model memory specific
: Two freely adjustable stopwatches Software list Base functions
Alarm, mixer, low voltage, timer
Model select, 30 model memories, model copy
Trainer mode, with individual function transfer and / or Mix mode
Stick Mode 1…4
Throttle function reverse
Multi-lingual transmitter software
Operating hours timer
Range-check mode
User name ten characters
Digital operating voltage display
Model functions
Model name ten characters
Servo reverse, channels 1…۸
Fail-safe channels 1…۸
Servo travel adjustment ATV / EPA
Servo centre offset sub-trim
Trim value memory
Trim increment adjustment
Throttle cut
Free channel selection (5…۱۰) and transmitter control selection
Two count-up / count-down stopwatches
Model timer
Digital stick trim with variable increment
Idle trim with reverse ATL
Reset
Fixed-wing model aircraft
۳ x switchable control travel D/R
۴ x Exponential function EXP
۶ programmable mixers with offset 4 x linear, 2 x 5-point
Flaperon mixer with differential
Flaperon trim (flaperon mixer value
V-tail mixer V-tail
Delta mixer (elevon) with differential
Aileron -> rudder • Elevator -> flaperon
Flaperon -> elevator
Airbrake ailerons as flaps / airbrakes
Ailvator mixer aileron – elevator
Snap-roll
Gyro mixer 2/3 rates
Throttle curve
Propeller pitch
Throttle delay
Idle 2
Throttle – needle valve mixer
Model type selection
: Model helicopter
۳ x switchable control travel D/R
۴ x Exponential function EXP
۶ programmable mixers with offset (x linear, 2 x 5-point
۵-point throttle curve, Normal, Idle-up 1, 2 and 3
۵-point collective pitch curve, Normal, Idle-up 1, 2, 3 and auto-rotation
Hover throttle trim mix trimmer
Hover collective pitch trim
Gyro gain set-up menu
Offset mixer (roll – pitch-axis – tail rotor), all flight modes
Auto-rotation with tail rotor offset
Collective pitch -> tail rotor mixer
Swashplate – throttle mixer
Governor set-up menu speed regulator
Swashplate travel adjustment AFR for roll – pitch-axis – collective pitch
H1, H2, H3 (1:1:1), H4, HR3, HE3, HN3, H4X swashplate linkage types
Collective pitch min. and max. adjustment
Throttle – needle valve mixer
Swashplate ring mixer
Swashplate mixer menu
Model glider
۳ x switchable control travel D/R
۴ x Exponential function EXP
۶ programmable mixers with offset 4 x linear, 2 x 5-point
Aileron – rudder
Rudder – aileron
Camber-changing flaps
Flap mixer
Butterfly (crow) and Butterfly – elevator
Flap – elevator
Elevator – flap
Aileron – flap
Aileron – airbrake
V-tail
Motor
Gyro mixer
Model type selection
احسان –
این ریموت کنترل مناسب پرنده های کاستوم می باشد .